Panel JDY-10 Bluetooth 4.0 module BLE serial port transparent transmission Compatible with CC2541 | Обустройство дома

Panel JDY-10 Bluetooth 4.0 module BLE serial port transparent transmission Compatible with CC2541 | Обустройство дома

Model: JDY-10 Bluetooth 4.0 slave module

Kernel: M0

Communication interface: serial port

Working voltage: 1.9-3.6V

Communication distance: 100 meters (some modules have large transmission power, and the communication distance is much farther than the previous modules.

Working current: 90ua

Suspen mode: 14 uA

Module is: Bluetooth 4.0 slave

Product introductionPrefix = "o" ns = "urn:schemas-microsoft-com:office:office"

   JDY-10The transparent transmission module is based on Bluetooth4.0Protocol standard, the working frequency band is2.4GHZRange, modulation method isGFSK, the maximum transmit power is8db, maximum launch distance80Meter, with low power consumption, small size, strong signal, stable data transmission and other characteristics.

product features

1:stand byAndroid,IOSMobile phone data penetration

2: Support low power consumption (standby current can reach severaluA)

3:stand byGPIOversusUARTPeripheral interface

4:stand byATInstruction operation

5:accessibleFCC/CEStandard certification

Product application range

1:BluetoothledLighting

2:Motor adjustment and other products

3: Anti-lost alarm and other products

4: Sports Health Care

5:home appliances

6:vehicle electronics

Technical specifications:

Types of

Specifications

Operating Voltage

1.9 - 3.6V

Operating temperature

-40 - 85°C

Maximum transmit power

+8dbm

antenna

PCBOnboard antenna

Receiving sensitivity

-92dbm

Average current

Wake mode

90uA

Suspenmode

14 uA

Deep Sleepmode

1uA

 Factory default configuration:

Service UUID: FFE0

Feature UUID: FFE1

Serial port baud rate: 115200bps

This module is a serial port transparent transmission module (Customizable4roadPWMOutput,15roadIOPort input and output,Customers who need customization can contact the service

ATInstruction Set

Users can communicate with the Bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported.

Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps.

Instruction set details

(Note: You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled.

When the tooth module is connected to the device, the Bluetooth module enters the data transparent transmission mode)

Detailed instructions

(The AT command is case sensitive and ends with a carriage return or line feed character: rn)

1, Get the version number:

instruction

response

parameter

AT+VER

+

Param:version

default:+JDY-10-V1.8

2, Get the Bluetooth MAC address

instruction

response

parameter

AT+MAC

+MAC: 

Param:MACaddress

3, Set the Bluetooth name

instruction

response

parameter

AT+NAME

OK

Param:Bluetooth name

Default name:JDY-10

longest18byte

4, Set / Query - Transmit Power

instruction

response

parameter

AT+POWE

AT+POWE

OK

+POWE: 

Param:(0-5)

0:8db

1:5db

2:0db

3:-5db

4:-10db

5:-13db

1, Set / Query - Serial Port Baud Rate

instruction

response

parameter

AT+BAUD

OK

Param:(0-7)

0:115200 bps

1:57600 bps

2:38400 bps

3:19200 bps

4:14400 bps

5:9600 bps

6:4800 bps

7:2400 bps

AT+BAUD

+BAUD:

2, Settings / Query - Broadcast Interval

instruction

response

parameter

AT+ADVINT

OK

Param:(0-6)

0:100ms

1:100ms

2:250ms

3:500ms

4:1600ms

5:3200ms

6:4800ms

AT+ADVINT

+ADVINT:

Size package