III CS CMS cm I differential pressure transmitter Celeron II ZS. in 1. | Обустройство дома

Type 1, cs, cs - iv transmitter in the form of switch to oil filter plugging alarm, or in the form of switch to cut off the control circuit associated with the hydraulic system, so as to protect the safety of the system.
The cs - iii differential pressure transmitter has m22x1.5 connecting threads.
Cm differential pressure transmitter has the same connection size as cs - ii and cs - v, and can be used in zu and Xu filters made in China.
The application of CMS type pressure differential transmitter is similar to CM type, with visual indication, CS-V with CMS type, but without visual indication.
2, type CM-I is the indicator pressure transmitter. The red indicating button on the upper part of the transmitter indicates the action of the transmitter and has been alarms. When cleaning or replacing the filter element, the red indicating button of the transmitter should be reset manually, and the connecting thread of the transmitter is M22X1.5..
Cms - type transmitter combines electrical and target transmissions, both electrical and target. it combines electrical and target transmissions to both electrical and alarm. after cleaning or replacing the filter element, the red indicator button of the transmitter resets automatically.
The reliability of the transmitter can be improved because of the failure of electrical components or circuits, if the electric signal can not be alarm, and the other end can also give an accurate alarm.
When the hydraulic system work, the filter in the oil filter is blocked the import and export of pollutants, pressure differential pressure, when the pressure difference increases to the sender with the set value, the sender end switch alarm signal, and the other end albumose transmitter red button to pop up alarm indication system operator filter should be cleaned or replaced in a timely manner, to ensure the normal operation of the hydraulic system.
The basic function of the pressure difference signaling device is a hydraulic system in the work process, impurity particles in the oil by the oil filter in the filter blocking filter so as to gradually produce plug, oil inlet and outlet pressure difference (i.e. pressure loss), when the pressure value reaches 0.35Mpa, automatically switch on the power source, display hearing the signal.
Technical data of main technical parameters of transmitter Model
Modelworking pressure
Working pressure(MPa)Transmission value
Switch setting(MPa)Operating temperature temp. range ( ℃ )Transmitter power Power (V/A)CM-I320.1+0.05
0.2+0.05
0.35+0.05
0.45+0.05
0.6+0.05
0.8+0.05
1+0.05-20~+80-CS-III≤220/0.25CS-IVCS-VCMCMSCMS-ACY-I1.6CY-IIYM-I-CYB-I0.35+0.05DC24/2ZS-I-0.9-0.01~0.018≤220VZKF-II-0.018DC24/2